Monday- Friday 9am - 6pm | Saturdays 9am - 4pm|0161 464 7828
Loading...

RIMBLADES FLEX by Rimblades Alloy Wheel Rim Protector

RIMBLADES FLEX by Rimblades Alloy Wheel Rim Protector

£27.98

RIMBLADES FLEX by Rimblades

10 COLOURS AVAILABLE
Lime Green, Silver, Blue, White, Orange, Yellow, Black, Pink, Red, Gold

 

 

SKU: N/A Categories: ,

Description

Rimblades Flex replace the original Rimblades.

  • They are a medium weight stick on rim protection and styling product that are bonded to the alloy wheel surface with a 3M tape that is factory installed on one side. Totally redesigned with an improved material,
  • Universal fitting
  • 10 colours available
  • Easy to fit kits, suitable for both DIY and professional installation.
  • One universal size that fits most modern alloy wheels up to 22″ diameter
  • Designed and manufactured in the United Kingdom.

Suitability:

Rimblades Flex is suitable for wheels with a continuous smooth and rounded edge.

Kit includes:
4 x 1.9m lengths of rim protectors with 3M tape installed
4 x wheel IPA wipes,
4 x 3M primers
Fitting instructions

Anyone can fit Rimblades products with no mechanical experience required

Additional information

Colour

RED, BLUE, BLACK, SILVER, WHITE, ORANGE, LIME GREEN, YELLOW, GOLD, PINK

Additional Information

Rimblades have been fully tested by Millbrook for high speed endurance, various road surfaces and kerb strikes at various angles. Additionally the tape bond has been laboratory tested by 3M and digital simulation conducted.
Because alloy wheel rims have different finishes and could be painted, powder coated, polished, chromed, diamond cut or even have stainless steel lips you have to make the surface universally suitable for bonding the tape to. This is why we include a specially formulated primer to increase the surface energy on the wheel surface to enable the tape to bond sufficiently.
Any silicone left over from tyre and wheel cleaners or tyre lubrication spray will totally stop adhesion. Wheels need to be totally free of all contaminants.
New Alloy Wheels: Some manufacturers and dealerships will coat new wheels with an anti-brake dust coating. This will inhibit Rimblades products performance and needs to be scrubbed off prior to fitting.
Refurbished Alloy Wheels: We only recommend using Rimblades if repaired or repainted wheels have been done to a high standard and had sufficient time to cure and harden.
Cold or damp conditions: In these conditions you will be bonding to a damp surface due to moisture in the air.. A simple hairdryer could be used or a hot air gun if you have access to one to warm the surfaces and ensure they are totally dry.
Very important: These tapes are pressure activated, so go around pushing the product on with firm pressure. Once fitted, drive carefully until tape fully cured. This means the maximum bond is not instant, but takes around 72 hours to fully cure, although useable bond strength is reached within 24 hours.

What tools do I need to fit Rimblades products?
A pencil or craft knife and a pair of scissors. In cold weather a hot air gun or hairdryer too.
They are designed to be a sacrificial product. This means that if you hit one of them hard, it will need to be replaced.

Reviews

There are no reviews yet.

Be the first to review “RIMBLADES FLEX by Rimblades Alloy Wheel Rim Protector”